Description
| Operating Pressure | 6.2 bar / 90 psi |
|---|---|
| Maximum Speed | 25000 rpm |
- For sanding/grinding, deburring, moulding/routing and engraving
- Integrated speed control
- Ergonomic, partially rubber-coated housing: cold-insulating, non-slip and low vibration for comfortable work
- Safety lever for protection against accidental start up
- Rotatable exhaust guide at the side of the housing.
Scope of Delivery in DG 25 set :
- EURO Plug-in nipple 1/4″
- 2 collets (3 mm, 6 mm)
- 5 mounted points each (3 mm, 6 mm)
- 2 open-jawed spanners (13 mm, 16 mm)
- Plastic carry case
- ARO/Orion Plug-in nipple 1/4″
- ISO Plug-in nipple 1/4″
| Operating Pressure | 6.2 bar / 90 psi |
|---|---|
| Air Requirement | 300 l/min / 11 cfm |
| Maximum Speed | 25000 rpm |
| Collet Chuck Bore | 6 mm / 0.2362 “ |
| Weight | 0.43 kg / 0.9 lbs |
| Vibration – Surface Grinding | 0.1 m/s² |
| Uncertainty of Measurement (Vibration) | 0.8 m/s² |
| Noise Emission – Sound Pressure Level | 75 dB(A) |
| Noise Emission – Sound Power Level (LwA) | 87 dB(A) |
| Uncertainty of Measurement (Noise Emission) | 3 dB(A) |
Reviews
There are no reviews yet.