Skip to main content

Taps & Threading Tools

160 products

Sort by

Products

Showing 121–144 of 160

About Taps & Threading Tools

Taps cut internal threads and dies cut external threads. First identify the thread standard: metric coarse (such as M6 x 1.0 or M12 x 1.75), metric fine, BSW, UNC or UNF. The size and pitch on the tap or die must match the bolt or part you are working with. A hand tap set of 3 pieces (taper, intermediate and plug) is used in sequence for blind and through holes, while spiral point taps push chips forward in through holes and spiral flute taps lift chips out of blind holes.

Choose the material by the job. Carbon steel taps and dies suit occasional hand work in mild steel and soft metals; HSS taps are tougher for regular workshop use, and HSS-E with TiN coating suits machine tapping. Drill the correct tap drill size first, using a thread chart. Use a tap wrench or die stock, keep the tool square, use cutting oil, and turn back often to break chips. Split dies can be adjusted slightly to fine-tune thread fit.

We list OZAR and other brands at prices that include GST, with a GST invoice on every order and delivery across India. Tool rooms, fabricators and maintenance workshops buying several units can ask for a bulk quotation.

Questions buyers ask

Which tap should I use for a blind hole?

Use a plug tap or a spiral flute machine tap, which lifts chips out of the hole. Finish with the plug tap in a 3-piece hand set.

What drill size do I need before tapping?

Use a tap drill chart for your thread. For metric coarse threads, the drill size is roughly the thread size minus the pitch, for example 10.2 mm for M12 x 1.75.

What is the difference between carbon and HSS taps?

Carbon steel taps suit light, occasional hand use. HSS taps last longer and handle harder steel and regular workshop use.

Do prices include GST?

Yes. Prices include GST and every order gets a GST invoice.